This sleek Power Conditioner/Sequencer will safely power up a rack full of equipment in a 3-step delayed sequence, and reverse the process for power-down. Featuring Furman's Series Multi-State Protection Plus (SMP+), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (E.V.S), the PS-PRO II is the Fort Knox of transient voltage surge suppressors.

You can initiate the power up or down sequence with either momentary or maintained switches, locally or remotely. A duplex outlet is provided for each delay step. You can set the delay time with a simple front panel screwdriver adjustment. The PS-PRO II also features a locking switch with a removable key for maximum security. You can even install one or more PS-PRO IIs in remote locations and operate via low-voltage wiring. It includes a rear mounted BNC jack that accepts any standard (12VAC, 0.5A) gooseneck lamp for rear rack illumination, as well as a front panel switch that controls the gooseneck's operation.

Features:
• Series Multi-Stage Protection Plus (SMP+) with Extreme Voltage Shutdown (EVS)
• Linear Filtering Technology (LiFT) with zero ground contamination
• Six sequenced rear panel outlets (in 3 groups), two switched rear panel outlets, and one front panel unswitched outlet
• Momentary and Maintained sequencing via rear panel terminal block or front panel switch
• BNC connector on the rear panel allows you to attach any standard 12V gooseneck lamp to illuminate the rear of your rack
• 20 amp rating

Specifications:
• Current rating: 20 amps ("E" versions 16 amps)
• Operating Voltage: 90 to 140 VAC (“E” versions 180 to 280 VAC)
• Over Voltage Shutdown: 140 VAC typically (“E” versions 280 VAC typically)
• Spike Protection Modes: Line to neutral, zero ground leakage
• Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
• Response time: 1 nanosecond
• Maximum surge current: 6,500 amps
• Noise attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz Linear attenuation curve from 0.05 - 100 Ohms line impedance
• Power consumption: 6 watts
• Dimensions: 1.75” H x 19” W x 10.5” D. Weight: 11 lbs (5 kg);
• Construction: Steel chassis, .125” brushed and black anodized aluminum front panel; glass epoxy printed circuit boards