ATI DA416
Quad 1x4 Distribution Amplifier

The DA416 is a quad 1x4 distribution amplifier. Outputs are active balanced and individually adjustable (transformer-out versions available); inputs can be paralleled on rear connectors for 1x8, 2x8 [...]

ATI DA208
Dual 1X4 Distribution Amplifier

This dual distribution amplifier offers transparent performance with serious RF protection. It boasts two inputs, each driving four individually adjustable, active balanced outputs. You can also [...]

ATI DDA212XLR
Dual 1x12 XLR Distribution Amp

The ATI DDA-212XLR distributes digital audio (AES3) at up to 192kHz sample rates with incredibly low jitter and ultra-short propagation delay. Switchable inputs let you choose from multiple input [...]

ATI DXA112XLR
1X12 Audio Distribution Amp

These AES/EBU digital audio distribution amplifiers are available with 12 balanced XLR or 24 unbalanced BNC outputs per channel. The provide an economical stand-alone digital audio distribution [...]

ATI DMA103
Mic Distribution Amplifier

The DMA103 1x3 audio distribution amplifier accepts a microphone level input signal and provides either line or microphone level outputs to drive balanced or unbalanced lines. The DMA103 provides [...]

ATI DA206
1X3 Dual Distribution Amplifier

This dual distribution amplifier offers two 1x3 channels with balanced inputs and +24dBm outputs. A master gain adjustment for each channel controls all three outputs together to adjust for varying [...]

ATI DDA106XLR
1X6, XLR Distribution Amplifier

This AES/EBU digital audio distribution amplifier offers a single input configuration, with levels and connectors optimized for use with balanced XLR 110 ohm cable. Its adjustable input equalization [...]

ATI DSA212XLR
Dual 1X6 XLR Digital Audio Clock And Sync DA

The ATI DSA Series is a family of stand-alone digital audio distribution amplifiers available in 1X6 BNC or XLR, 1X12 BNC or XLR, and 1X24 BNC configurations. DSA Series units are simplified, without [...]

ATI L200XLR
*Dual Line/Buffer Amp

ATI's L200XLR, part of their Nanoamp 1/3-rack-size series, is a dual line attenuator/impedance converter/signal splitter/summing amp. Rack mount and desk mount kits are available as options. WA100-1 [...]

ATI MM100
*Match Maker

The ATI MM100 is a bidirectional stereo interface which converts the unbalanced IHF outputs of CD players or other consumer-level, unbalanced audio gear to transformer-balanced and isolated 600 ohm [...]

ATI DA208S
Dual 1x4 Distribution Amplifier Signal-Present Indicators

Similar to the ATI DA208, this model adds signal-present indicators. This dual distribution amplifier offers transparent performance with serious RF protection. It boasts two inputs, each driving [...]

ATI DSA106BNC
1X6 BNC Digital Audio Clock And Sync DA

The ATI DSA Series is a family of stand-alone digital audio distribution amplifiers available in 1X6 BNC or XLR, 1X12 BNC or XLR, and 1X24 BNC configurations. DSA Series units are simplified, without [...]

ATI DSA106XLR
1X6 XLR Digital Audio Clock And Sync DA

The ATI DSA Series is a family of stand-alone digital audio distribution amplifiers available in 1X6 BNC or XLR, 1X12 BNC or XLR, and 1X24 BNC configurations. DSA Series units are simplified, without [...]

ATI DXA212XLR
Dual 1X6 Audio/Clock/Sync Distribution Amp

This model (DXA212XLR) is dual 1x6 XLR outs.These AES/EBU digital audio distribution amplifiers are available with 12 balanced XLR or 24 unbalanced BNC outputs per channel depending on model. The [...]

ATI HDA400
4-Channel Headphone Amplifier

The HDA400 is a professional 4-channel headphone amplifier and stereo monitoring system. Balanced 1/4" TRS stereo line inputs with a master level control, clipping indicator and stereo/mono switch [...]

ATI HDA600
6-Channel Headphone Amplifier

The HDA600 is a full featured, 6-channel stereo headphone distribution system. Parallel balanced XLR and 1/4" TRS cue and stereo line inputs allow easy loop-thru and connector flexibility. A mic/line [...]

ATI ML200
Dual Microphone To Line Amplifier

The ATI ML200 is high-quality mic preamplification in a compact package. Features: flat frequency response; servo balanced line outputs (+22 dBm); front panel selection of phantom power (regulated [...]

ATI UADC1
Analog To Digital Audio Converter/Switch

The ATI UADC-1 Utility Analog-Digital Converter offers professional quality 24-bit A-to-D conversion and can provide seamless AES audio path insertion and interruption functions. The UADC-1 may be [...]

ATI DA412
1X3 Quad Distribution Amplifier

This quad distribution amp offers transparent sound and maximum versatility, giving you four inputs that each drive a master input gain adjustment and three individual output level trimmers to ground [...]

ATI DSA112XLR
1X12 XLR Digital Audio Clock And Sync DA

The ATI DSA Series is a family of stand-alone digital audio distribution amplifiers available in 1X6 BNC or XLR, 1X12 BNC or XLR, and 1X24 BNC configurations. DSA Series units are simplified, without [...]

ATI MCDA-112
Studio Master Clock Generator

The ATI MCDA-112 provides both an ultra-stable clock reference and a 1x12 clock distribution amplifier in a single 1RU enclosure. As a master clock generator, the MCDA-112 offers a total of 12 Word [...]

ATI MX100C
3 Channel Mono Mixer

MX100C Features: 3 low-noise, balanced mic/line inputs; phantom power; a single balanced or unbalanced output; headphone output; XLR I/O connectors. MX100C only with switchable limiter. Options: [...]

ATI ADAC2
Dual Channel AD / DA Converter with SRC

The ADAC-2 from ATI is a 2-Channel 24-bit/192kHz AD/DA Sample Rate Converter engineered by DaySequerra to deliver uncompromised audio performance. Offering three independent A-D, D-A and SRC signal [...]

ATI AMM200
*Analog Metering Monitor

The ATI AMM200 analog monitor is a full-featured stereo line amplifier and monitor providing balanced XLR line inputs and amplified outputs, stereo headphone drivers and a stereo LED meter. The [...]

ATI BGD200PPM
*Dual Bar Graph Meter Display w/PPM Response

The ATI BGD200-PPM dual bargraph level meter displays PPM response (-15 to +12 dB). Its 2-color, 10-segment displays are visible even in bright sunlight and it can be mounted directly under video [...]